Dear Hentai Kamen, Thank you for contacting FOBO. We recommend disabling the sensors in the app by pressing and holding the sensor's box, then selecting "Disable." Alternatively, you can log out from the app via the user's profile page. This will stop receiving alerts when you remove the sensors from the tire valves or when maintenance is required. Should you encounter any other issues, please feel free to contact us for further assistance by writing an email to "fobo@salutica.com.my " Best regards, Customer Experience Team Salutica Allied Solutions Sdn. Bhd. (a subsidiary of Salutica Berhad) 3 Jalan Zarib 6, Kawasan Perindustrian Zarib, 31500 Lahat, Ipoh, Perak, Malaysia T  +605 320 6886   F  +605 322 2029 | my-fobo.salutica.com.my

Thank you for your support. I have already found the section about disabling the sensor in the manual. However, it does not explain how to reintegrate the sensor after maintenance. Is there an equivalent "Enable" function for "Disable," or do I need to set up the sensor from scratch again?

All good. I found the "Enable" function. It's not described in the manual, but I was able to use it to reactivate the sensor. The "Enable" function is accessed the same way as the "Disable" function—press and hold the sensor, then tap "Enable."